Parrot CK-70003S
October 13, 2008
Parrot CK-70003S is handy speaker kit that allows you to enjoy the hands-free convenience of Evolution. In this LS-COLOR Bluetooth car kits, you take pleasure in listening clear sounding without having to splice into your system of car stereo. All that is required is to connect simply the included wire harness to your control panel of parrot CK-70003ST. And then, position the compact speaker in a safe spot in the car. You would afford to hear your callers at a comfortable volume. Now, you do not need to nose about for your phone and adjusting the annoying headsets.
This, Parrot CK-70003S, offers a very unique design with visuals to match. The top-mounted 28mm soft dome tweeter with Neodymium magnet is in a solid piece of extremely rigid machined steel bar. It has double polypropylene cone hybrid midrange units, which are said to give a truly amazing level of spaciousness. An integral two-stag constant pressure bass chamber with dimensions of 4-1/2? Wx2-3/4?Hx2?D drive units produces deep bass. With a claimed frequency response sensitivity, the one-year warranty this speaker consumes 6 watts. The cabinet of Parrot CK-70003S is constructed from aluminium alloy. There are inductors, which are optimally aligned to minimise the effect of distortion caused by stray electro-magnetic fields.
The auto-mute feature on the Parrot CK-70003S mutes your factory stereo when your phone rings. You can activate this feature by connecting your stereo’s mute lead wire to the wire harness included in this kit. Here, you would find a mute lead wire on factory radios in most vehicles external speaker and harness for Parrot CK series hands-free car kits powered by 6-watt amp of a 4-ohm speaker in Parrot CK control unit installation hardware and wire harness.
Simply, you, just, connect it to the mute assembly cable assay that comes with the Parrot-CK70003S and either mount it underneath the dash or tuck it under the dash. If you can’t get a cable assy to go with your unit then get one of these instead. Another benefit is that you can actually hear a call with your radio off which you hook up the CK-70003S into your existing radio. Keep in mind that if your radio has a mute wire, you can still connect it to the parrot CK-70003S harness so your existing radio would mute when a call comes in.
The Parrot CK-70003S speaker kit is compatible Bluetooth car kit. The speaker has a proprietary rectangular 8-pin connector that plugs into the range of parrot CK70003S electronic control unit wiring harness, do away with the need to unite into your car speaker wiring harness. The supplied mounting bracket and hardware allow you to mount the speaker to any hard, flat surface.
PAC SWI-CAN
October 13, 2008
PAC SWI-CAN converts the steering wheel radio buttons to dual multipurpose controls. This allows control of an aftermarket gadget using the vehicle?s factory steering wheel radio controls, while maintaining normal control and operation of the factory stereo. The interface would have command over most of audio and video products that have an IR remote control. A remote IR emitter attaches to the front of the IR window. The PAC SWI-CAN solves the problem of lost remotes in a vehicle that allows the driver to control the system without taking hands off the wheel or eyes off the road.
Usually, PAC SWI-CAN determines the Interface Wire Color i.e., Green, Yellow, Orange, Red, and White. The wire connects to vehicle?s steering wheel control wire Interface Connector. This image is found on the Vehicle Connector Chart. The Pin Number and Color refers to the vehicle?s SWC wire located in the Interface Connector (if available. This Version number tells the interface what the circuit type is being used. This has address on the next page. The Note ID is a vehicle specific programming tip or connection instruction. All that you need to do is to read notes in the note chart specified by the Note ID. This refers to the loops on the PAC SWI-CAN connector. Cut these loops only if instructed to do so.
Just connect a few wires, mostly only 3 wires in standard cars. The direct connection to the stereo means there is no need for an infrared emitter that allows the PAC SWI-CAN to function even in bright sunlight. The step-by-step LED confirmation makes programming easy. Once you get connected, the SWI-CAN failsafe memory learns up to 5 stereo functions, retaining them even if battery power is interrupted. Warranty: 1 year.
PAC SWI-CAN covers over 95% of the vehicles made from 1986 to current. The SWI-CAN allows the customer to retain the use of their steering wheel or rear seat radio controls when replace the factory head unit. Works with Steering Remote Ready radios, the SWI-CAN retains the use of heater power buttons on GM vehicles. The PAC SWI-CAN features just cannot be beat. The Additional Notes are connections that may have been supplied by the radio prior to removal. These must be made in order to complete the steering wheel control circuit. Some vehicles would require an additional CAN bus interface.
This, PC SWI-CAN, not only covers Ford, GM or Chrysler, Dodge but also it covers Acura, Audi, BMW, Buick, Cadillac, Chevrolet, Chrysler, GMC, Harley Davidson, Honda, Hummer, Infiniti, Isuzu, Toyota, Land Rover, Volkswagen, Mazda, Mercury, Mitsubishi, Nissan, Oldsmobile, Pontiac, Saab, Jaguar and Lincoln. PAC SWI-CAN interface allows you to use the steering wheel controls in a wide variety of vehicles to command your new Pioneer or Sony radio
PAC SWI-X
October 13, 2008
PAC SWI-X is a learning remote device, which allows you to retain the use of your steering wheel or rear seat radio controls when replacing the factory head unit. This range of SWI works with virtually all aftermarket radios with wireless infrared remote capability. This l interfaces most aftermarket stereos into most vehicles with steering wheel or rear seat audio controls. It also retains the use of heater control buttons on GM vehicles. No competent is the gadget can beat the Patent Pending SWI-X features.
Work with Alpine, Blaupunkt, Clarion, Eclipse, JVC, Kenwood, Panasonic, Pioneer Rockford, Sanyo, Sony or just about any other brand out there. This allows you to use the steering wheel controls in a wide variety of vehicles to command your new Pioneer or Sony radio This, PAC SWI-X, covers Acura, Audi, BMW, Buick, Cadillac, Chevrolet, Chysler, GMC, Honda, Hummer, Infiniti, Jaguar, Land Rover, Lincoln, Mazda, Mercury, Mitsubishi, Nissan, Oldsmobile, Pontiac, Saab, Toyota and Volkswagen. More so, it covers Harley Davidson motorcycles.
Assigned the buttons on the steering wheel with any infrared function on the remote, the SWI-X can be modified to directly plug into the remote port of the Alpine headunit. The buttons on your steering wheel may be assigned to any of the following five Eclipse functions: volume up, volume down, mode, track up, and track down. So, do not be stuck with specific functions. With a select Alpine headunit, PC SWI-X converts the steering wheel radio buttons to dual multipurpose controls. This allows control of an aftermarket Audio/Video system while maintaining normal control and operation of the factory stereo.
After installation, the remote control of headunit can still be used. The SWI-X may be programmed as many times as desired. The simple installation and programming procedures are included in the units? instructions. The SWI-X retains steering wheel heater controls in GM cars. Can be custom made to plug into Alpine’s DIN 1/2 stereos directly.
PC SWI-X has fantastic electronic gadget allowing the use of the steering wheel controls. It is strongly advised that buying or installing this SWI-X along with a new headunit as it greatly decreases the PITA factor. Only the pain gurgles at the time of installing the infrared emitter that involves drilling into your car, which is never be fun, but cannot be avoided. The given instructions are excellent that is given the cost and degree of difficulty for the install.
In all, the PC SWI-X is designed to be universal so it can interface analog or serial data steering wheels. It can convert the signals generated by the factory remote location controls into infrared signals. You can easily programme or re-programme while using the factory controls and the head units remote control. The PC SWI-X allows you to retain the use of your steering wheel or rear seat radio controls while replacing the factory head unit.
PAC SWI-JACK
October 13, 2008
PAC SWI-JACK is universal that you only need one SKU to cover over 95% of the vehicles made from 1986 to current. The SWI-JACK allows the customer to retain the use of their steering wheel or rear seat radio controls when replacing the factory head unit. Works with Alpine’s OEM Steering Remote Ready radios. The SWI-JACK also retains the use of heater control buttons on GM vehicles. The PAC SWI-JACK features just cannot be beat.
You should never be stuck with a vehicle specific type interface. This range of PC SWI-JACK has non-volatile memory, which keeps all programming in memory even when the vehicle battery gets disconnected. The SWI-JACK controls Alpine, JVC, Kenwood, Clarion and Blaupunkt radios with a wired remote input. The buttons on your steering wheel may be assigned to any of the following five Eclipse functions: volume up, volume down, mode, track up, and track down. Also, it has mute, Preset Up, Preset Down and Band.
The SWI-JACK covers a range of vehicles i.e., Ford, GM or Chrysler, Dodge, Acura, Audi, BMW, Buick, Cadillac, Chevrolet, Chrysler, GMC, Harley Davidson, Honda, Hummer, Infiniti, Isuzu, Jaguar, Land Rover, Lincoln, Mazda, Mercury, Mitsubishi, Nissan, Oldsmobile, Pontiac, Saab, Volkswagen and Toyota.
PAC SWI-JACK sends different commands to compatible head units via wires; so bright that sunlight does not affect operation, like it does with infrared-based interfaces. Unlike the SWI-X, the SWI-ECL2 is not affected by bright sunlight. PAC SWI interface allows you to use the steering wheel controls in a wide variety of vehicles to command your new Pioneer or Sony radio.
If you want to install a Pioneer or Sony stereo in your vehicle, but you hate to give up the convenience of your factory steering wheel radio controls? This interface allows you to use the steering wheel controls in a wide variety of vehicles to command your new Pioneer or Sony radio.
Some vehicles have a separate wire for each of the steering wheel buttons. Use the resistor kit for steering wheel push buttons that do not already have a resistor network connected to them. The resistor kit includes a range from 47 Ohms (yellow, violet, black) to 5100 Ohms (green, brown, red).
Installation of PAC SWI-JACK is straightforward. Just connect a few wires, only 3 wires in many cars. The direct connection to the stereo means there’s no need for an infrared emitter, allowing the SWI-PS to function even in bright sunlight. Step-by-step LED confirmation makes programming easy. Once connected, the PAC SWI-JACK failsafe memory would learn up to 9 stereo functions, retaining them even though battery power is interrupted. It has dimensions 3-5/84″W x 1″H x 1-9/16″D. Warranty: 1 year.
PAC SWI-ECL2
October 13, 2008
PAC SWI-ECL2 allows you to retain the use of your steering wheel and rear seat radio controls when replacing the factory head unit with a compatible Eclipse receiver. Also, it retains the use of heater control buttons on GM vehicles. If you want to install an Eclipse stereo in your vehicle, but you hate to give up the convenience of your factory steering wheel radio controls. No problem, as PAC’s SWI-ECL2 interface gives you to employ the steering wheel controls in a wide variety of vehicles to command select Eclipse radios.
The vehicle compatibility with PAC SWI-ECL2 is the most important of the following vehicles i.e., Acura, Dodge, Isuzu, Mercury, Pontiac, Audi, Ford, Jaguar, Mini Cooper, Plymouth, BMW, GMC, Kia Mitsubishi, Saab, Buick, Honda, Land Rover, Mercury Saturn, Cadillac, Hummer, Lexus, Nissan, Suzuki, Chevrolet, Hyundai, Lincoln, Oldsmobile, Toyota, Scion, Chrysler Infinity, Mazda, Harley Davidson, and Volkswagen.
This PAC SWI-ECL2 sends commands to compatible head units via wires, so bright sunlight would not affect operation, like it does with infrared based interfaces, unlike the other range of SWI. It uses the resistor kit for steering wheel push buttons that does not have a resistor network connected to them. The resistor kit comprises the following resistors i.e., 47 Ohms (yellow, violet, black), 100 Ohms (brown, black, brown, gold), 150 Ohms (brown, green, brown), 560 Ohms (green, blue, brown), 1000 Ohms (brown, black, red), 1500 Ohms (brown, green, red), 3900 Ohms (orange, white, red), and 5100 Ohms (green, brown, red).
Apart from that, there is a head Unit Compatibility that interfaces its compatible with any aftermarket steering remote ready Eclipse radio that has wired remote input leads. This range of PAC SWI-ECL2 is easily programmable. It has buttons on its steering wheel, which are assigned to any of the five Eclipse functions i.e., volume up, volume down, mode, track up, and track down. That is supported by its non-volatile memory that keeps all programming in memory even if battery of the vehicle is disconnected.
PAC SWI-ECL2 has steering wheel controller that is something nice to have and this is the only way to allow one to keep the controller with an aftermarket deck. The install is very easy. Inside the package there is a link to website of PAC that tells what wire to use for your specific car, a very detail instruction on how to install it is given.
However, there are two things, which one might not like in PAC SWI-ECL2. First is the delay when you press the button. Like when you push the button to turn it up, it would turn it up in a sec or two. Second is the mode button that allows me to change from CD to radio and stuff like that. Although not much, but annoying a little bit.
Kenwood KNA-RCDV330
October 13, 2008
Kenwood is a renowned name in the field of manufacturing car receiver, remote control and a lot more gadgets. It is trustworthy name to avail high quality and reliable devices. Kenwood has understood the need of the remote control for hassle-free command over the several devices and as a result, it has come up with its latest and high-end featured KNA-RCDV330 remote control. The Kenwood KNA-RCDV330 is fully loaded with the much more useful and required functions to operate the compatible devices. Now you don?t need to stick with your multimedia receiver to play, since the wireless remote control has provided you with adequate liberty to play functions.
The Kenwood KNA-RCDV330 remote control is capable of working with several current Kenwood models and you would definitely enjoy outstanding control of your system. In fact the latest Kenwood remote control is not compatible with all Kenwood head units; it works with limited multimedia devices including DDX512, DNX5120, and KVT-512. You can enjoy hassle-free management of these head units while doing some other works too. The remote control comes with easy-to-use features and you would avail it for convenient operations.
The KNA-RCDV330 remote control supports audio mode that allows you to power functions including source switching, volume, dual zone, AM/FM tuning and iPod/USB playback and a lot more. Not only this, the wonderful device also includes the DVD mode to operate functions including CD/DVD playback and file/track/folder searches. It is a standard device that fulfills your entire needs regarding controlling the plenty of multimedia gadgets.
If you want to run your TV tuner, the Kenwood KNA remote control also let you do so using its TV mode. You can select channel as per your choice to play with the help of the wireless remote control. You can say this that Kenwood has just paid fully and sincere attention in the manufacturer of such a fantastic remote control that is more powerful than other remote control while are flowing in the market.
The Kenwood has empowered its KNA-RCDV330 works well on two supplied ?AAA? batteries that come along with the unit. Moreover, the wireless remote control also operates off of IR transmission so the KNA-RCDV330 must be meaningful at the front-panel of your attuned Kenwood head units even within direct line of vision. Now you can experience with the high-quality and durable Kenwood remote control to operate the multimedia devices.
JVC RM-RK50
October 13, 2008
Today, it has become quite easy to flip through several TV channels, alter the music of media players or to perform a host of other actions even without moving anywhere. JVC RM-RK50 has brought you a wonderful JVC RM-RK50 remote control that can operate a lot more functions for you just by switching its buttons. It is frequently used for car audio and you can purchase it for hassle-free operation of your car audio. RK50 remote control provides you with more suitable operation of well-matched JVC stereos. The high-end remote control also controls all necessary functions, which include source selection, fast forward, rewind, track up/down, volume and power.
JVC RM-RK50 remote control comes in black colored cadaver with black and blue buttons and looks fairly attractive. It is the most sought after remote control because of end-user experience provided by it. Its suitable and pleasurable edge is quite spontaneous while permitting numerous remote control gatherings to be more dynamic at once. The latest JVC RM-RK50 remote control is associated with most of the JVC head units and works quite well. The remote control supports Power/ATT that allows you to power on, power off or even to mute the devices.
Not only this, the JVC remote control is fully packed with sophisticated features, which are quite easy to use. If you have been fed up with the particular sound, the remote control allows you to change the mode of sound as per your choice. Moreover, you can set the volume up or down through its vol+/vol- buttons. Seek, change track, audible search are also accessible by you using its reverse and forward arrows. Astonishing features and stunning looks are what have made the remote control more demanding in the market.
The JVC RM-RK50 remote control is user-friendly and quite convenient; you can manage the device with ease. Still the unit is too pretty and nothing to fix to that could avoid you dropping or loosing it. It is available at slighter cost and would be a better choice for you to have easy solution regarding operating the device. JVC is organizing its resources to make the superb in appealing, cost-competitive products and RM-RK50 remote control device is also one of JVC?s pioneering products. The simple JVC remote control supports infrared remote technology for better performance. A joystick and keypad are its wonderful input devices. JVC RM-RK50 remote control is offered for you along with one-year warranty.
